Geyser Thermostat Settings is something we all need to learn about since most homes have or use a geyser. But before that, let us understand a bit more about the device and how to make the best of it. Firstly, the thermostat is the main ‘heart’ of any heating device. It is here that the healing process takes place, thus, ensuring the true purpose of the machine. Let, browse within the insides of the thermostat to understand how it works.
While you blame or praise your geyser to either work well or not, it is the thermostat that does all the hard work. This device works by ‘snapping off the connection as and when the desired temperature is achieved. After a while, when the water cools down again, the thermostat establishes the connection again for the circuit to be completed, hence commencing the heating process. So, the job of the thermostat is to keep checking the temperature and snapping ON or OFF as required.
Also Read: Best Room Heaters in India
The Thermostat In My Geyser
It is a smart idea to locate the thermostat settings in a geyser. This will give you a better idea about how and when to control it. First, you need to understand that there are two types of water heaters available in the market. One has the thermostat setting visible, and another one where the settings are not obvious. As for the Visible thermostat settings, you can easily make the right settings as and when required. This comprises a rotating knob that the user can easily adjust as per requirement. The water heater without the adjustable thermostat settings has its temperature set at 55-60 degrees Centigrade. Here, the user gets to know about the ongoing heating process by the Red and Green lights located on the surface.
Also Read: Best Washing Machine in India
The Gas Water Heater Settings
If you own a gas water heater, locate a dial-like feature situated at the bottom of the structure. To adjust the temperature, you simply need to rotate the dial to the desired temperature. To acquire a complete hang of the settings, you will need to:
- Firstly, turn OFF the main power supply at the circuit breaker.
- Remove the access panel. This can be done easily with the help of a screwdriver.
- Set aside the insulation.
- Now, use the flathead thermostat to set the thermostat either UP or Down.
- If your unit comprises two thermostats, they both need to be adjusted to the same or similar amounts.
- Now pull back the insulation and replace the Panel.
- Restore the power supply back.
- Relight the pilot light to get the process started.
- You need to wait a minimum of three hours before checking on the temperature again.
Also Read: Best Juicers in India
What Temperature Is A Good Temperature?
Ideally speaking, the best temperature for showers is a personal preference. However, for the sake o Science, one can take note that 50 degrees Centigrade is just fine. The water heaters are designed to include a temperature range from 40 to 75 degrees Centigrade. As for the perfect heat setting, you might want to maintain it somewhere in the middle of the two ranges. This not only is a good choice to make but also saves electricity big time. However, one must understand that the more the difference between the incoming water and the existing water heating setting, the more electricity is consumed. So, you might want to keep the settings just right for the purpose.
There are also various other ways to cut down on electricity consumption at home. Some people use solar water heaters along with the electric version. This is to help maintain a balance of the weather conditions when the Sun is not out, and you will require electricity to heat the water that day. But it is important to remember that the temperature difference between the incoming water and the thermostat setting in a Solar heater is ‘designed’ to be less, hence less electricity consumption.
Also Read: Best Pedestal Fan in India
How to Save Big?
The electric geyser thermostat setting is fairly a basic aspect of use to be taken care of. But if you are one of those who wish to benefit from the comforts of the water heater and yet save on the electricity bills, here are a few pointers:
- Maintain the thermostat settings at a medium level. This will help avoid the water from overheating unnecessarily.
- Be sure to select the right-sized water heater. This will ensure you use only the sufficient amount required for your family and its needs.
- Multiple top brands have come up with some of the most electricity-efficient machines out there. So be sure to get yourself one that has a ‘5 Star Energy ratings’.
- It is never a smart choice to keep the water heater ON for no reason at all. Be sure to switch it ON a few minutes before you need to, and Switch it OFF when you are done with the shower.
- Also, it is a great idea to use heat-insulating paint to ensure there is no heat loss in the process.
Also Read: Best Air Conditioner(AC) in India
Problems And Solutions: Geyser Thermostat Settings
There are times when you have made the right moves but still end up cold and wet. Well, there are a few problems that might have arisen. Here is how to deal with them:
Solution: well, you have set the thermostat at a too-low temperature. Get hold of the feature and set it to the desired temperature
Solution: Try turning it right by yourself. If not, get professional help.
Solution: Replace the thermostat, as it does not appears to be doing its job well enough.
Geyser Thermostat Settings: The Conclusion
As mentioned, the thermostat is one of the most important features of the water heater. It is, therefore, necessary to know how it works. Also, as we all love to save big, one must know that there are ‘ethics on how to use an electronic.’ This way, you can enhance your overall experience and make the most of the appliance.