How to Fix the 4C Error in Samsung Washing Machine?

How to Fix the 4C Error in Samsung Washing Machine? Well, to start with, this is quite an easy error to resolve, and the best part is that it can be very much resolved. To start with, Samsung is one of the best brands out there when it comes to electronics and home appliances. Being one of the most reputed brands, it is obvious that the company takes into its stride to ensure maximum resolutions when faced with errors. 

How to Fix the 4C Error in Samsung Washing Machine?

The error 4C is generally due to a certain internal issue with your washing machine. This could also be due to the in/out water flow. When speaking of the internal issue, this could range from a faulty PCB to a clogged filter. An error of this nature is reported in the Samsung brand of washing machines and dishwashers and is not specific to a certain model. The user gets a ‘4C error’ code in their washing machine when the machine cannot perform the wash operation. There are also cases when this error occurs only for certain specific wash cycles. Meanwhile, there are cases when you get this error on all wash cycles. Specifically speaking, the ‘4C error’ signifies the fact that there is a ‘problem with the internal pressure’ of the washing machine, as the pressure between 0.5 bar and 8 bar is required for the normal functioning of the washing machine.

The Main Causes for the 4C Error

Before we get into how to fix Samsung washer code 4c, let us take a look at some of the main reasons for the error to occur: 

The Siphon Effect: This effect is caused when the drain hose of the washing machine is inserted deep below the machine’s water level. The effect occurs in the drum part of the washing machine, resulting in negative pressure on the machine drum. 

The Block in Water Valves: The other reason for this error is the blocked water valves. This can be easily noticed if the water is blocked or does not fill the machine in time. 

The Clogged Filters: The other reason for the 4 C error could also be the clogged filters, which cause the irregular water flow into the machine’s drum.

The Clogged Drum of the Washing Machine: The other main reason for the 4C error is the clogged drum that fails to detect the desired pressure in the drum of the machine. 

The Solutions

So, how to fix the 4c error on the Samsung washing machine? Here are some of the top solutions you can try out:

1. The Cold Power Cycle of the Washing Machine

Sometimes, a temporary glitch in the washing machine can lead to error 4C. For this, try running a cold power cycle of the washing machine that can clear the error. For this, you need to do the following steps:

  • Switch the power OFF of the Samsung washing machine. 
  • Next, remove the power cable from the main source.
  • Wait for about 5 minutes and plug back the machine.
  • Switch ON the washing machine. 
  • This should clear out Error 4 C.
  • If it persists, it is time to check for the level placement of the washing machine on the floor level. You can use the washer legs for this purpose. 

2. The Depth of the Drain Hose

Generally, the liquids flow from the higher levels to the lower levels. However, in the Siphon tube, the liquids are made to flow from the lower levels to the higher. But there are times when the washing machine’s drain hose is inserted deep into the drain pipe and can create a ‘Siphon.’ As and when this happens, the washing machine’s pressure sensor detects a negative pressure caused due to this effect and shows the ‘4C Error’. To resolve this, you can follow the below steps: 

  • Switch off the power supply of the washing machine 
  • Empty the drum completely
  • Next, try moving the drain hose up in the drain pipe until the hose is about 3 to 4 inches deep into the drain pipe.
  • Switch back the power of the machine and see if the error has been resolved. 

3. The Water Valves Blockage

There are times when the water valves of the washing machine are blocked, which can result in the failure to fill the drum with the required quantity of water. Here are the steps to resolve the issue:

  • Check for the closing and opening valves of the washing machine.
  • If the error continues, you must inspect the water hose connected to the machine for any kinks and bends. If these are present, you must ease and clear them up.
  • In case not, then close the water valve and disconnect it from the machine. 
  • Next, open the valves one by one and check if they are in proper working condition.
  • If not, check the valves for any clogs and clear them up. 
  • In case this also does not clear the error, you need to check the input hose with a burst sensor as this will cut off the water supply, as it senses that the hose has burst open. Once the machine or washer is open, it can also create the burst effect into the burst sensor, which in turn cuts off the water supply into the washing machine. Try checking for the same issue on other hoses if the error persists.

4. The Filters

There are times when the filters of the washing machine get clogged with sediments. This can result in the water not being filled into the washing machine as required. Here are the steps to follow in such a case:

  • Switch OFF the washing machine and disconnect from the power source.
  • Next, disconnect the water supply. 
  • Now look at the smaller filters that are fixed in the connector located at the back of the washing machine with the help of tiny clips.
  • Slowly and gently pull out the filters. 
  • Clean the filters and rinse them as required from under the tap water.
  • Once done, attach them back to the washing machine.
  • Re-start the water supply and move the valves back ON. 
  • Reconnect the power back on.
  • And check for the error. 

How to fix the 4C error in Samsung Washing Machine? : The Conclusion

These are some of the best ways when you are wondering How do I reset my Samsung 4c Washer code? However, be sure to get professional help if and when you feel the resolution is out of your league. 

Liked our content? Share it with Your Friends.