How to Install Inverter at home? It is not such a brainer that setting up any electronic gadget requires professional help. But what if you need to do it yourself? What if the expert you are relying on has not been able to arrive on time? Well, roll-up your sleeves and get to work. It is very much possible to install the Inverter at home by yourself. By following a few basic yet vital tips, one can easily get the job done in no time. So, how do you install an inverter by yourself? Let us find out:
1. The Location
The first thing you need to do is find the appropriate location for your Inverter. As this is an electronic gadget, you will need to ensure that the place you select is child-proof, safe, dry, and aerated. The place should also be away from any flammable materials or sources. Also, ensure that you place the Inverter at a place that is away from direct sunlight.
2. To Mount the Inverter
While it is permissible to mount the Inverter anywhere you like, just ensure that it is perpendicular to the wall.
3. The Battery Installation
For this, you need to remove the rear panel of the housing Chassis by unscrewing it. To reach the inside of the gadget, you need to remove the top lid. Now, it is time to place the battery with its long side along the front panel length. In case of multiple battery settings, make sure that the positive terminal of the battery is fixed to the right side of the main housing. Likewise, the positive terminal of the second battery will lie to the left.
4. The Battery Connectivity
It is important to ensure the connectivity of the battery. For this, use a low resistance wire as it helps in utilizing maximum energy.
5. The Final installation
For the final placement, it is advised to ensure that you place it on the main housing Chassis. This should face forward while keeping the electricity disconnected at all times. Finally, to connect the wires, you need to follow these steps:
- Connect the electric cable from the double pole switch with the other end of the cable with the IEC connector. This setup needs to be installed on the back-panel output located on the appliance.
- Now, the wiring harness of the battery needs to be attached to the back-input connectors.
- Switch on the device.
PRECAUTIONS TO BE FOLLOWED
- Be sure to lock the wheels of the Inverter to avoid it from moving unnecessarily.
- Always check the connectivity of the battery cables.
- Be sure to utilize low-resistant wiring for connection between the Inverter and the battery.
- Perform the installation process as you keep the power disconnected.
- Always ensure that the place of setup is done at a place that is away from the sunlight/flame./water.
The Conclusion
Installing an inverter can be done if the required steps are followed properly. An inverter is one of the primary electronic devices which is used in most homes. So, for it to be able to work well and serve you for a long time, proper maintenance and installation are required. It might seem like a major task, but the Inverter can be installed by yourself as well.