IFB Washing Machine Error Codes can help the user better understand how and what goes on within the working of the appliance. This way, you will be able to know when the user can accomplish a problem and when you need to get Service personnel. The Washing machine is one of their most important home appliances. This particular machine has easily brought down the hard work to a fraction of what it used to be. Now, with the latest technology at your side, the entire process of washing, rinsing, and drying the clothes is done within record time. What’s more, you no longer have to tug yourself with the machine’s working as it spins, transferring the clothes from one tub to the other. With the fully automatic machine at your side, the entire washing process is accomplished in one go.
Before we get into the IFB washing machine error code, let us know a bit about the brand itself.
The IFB washing machine is one of the leading home appliances companies with its headquarters in West Bengal. The company was founded in the year 1974 by Bijon Nag. The company has been credited to be one of the leading brands that, in collaboration with the Bosch-Siemens Hausgerate, has produced some of the best in semi and fully-automatic washing machines. This is in addition to the various other home appliances as well. IFB, in the world today, is one of the leading brands that have an ever-expanding customer base.
Also Read: Best Air Conditioner(AC) in India
IFB Washing Machine Error Codes List
Let us take a look at some of the most common IFB washing machine error codes:
1. rinS HOLd
Cause: This display means’ means’ Rinse, Hold Step.
Solution: You can restart the machine by selecting the Start/Pause button and then the “Drain” program.
2. dLAY
Cause: This displays Delay Start Mode
Solution: This implies the fact that you might have selected the Delay start mode by mistake. Hence the washing process will start at the scheduled time.
3. door
Cause: This error code is an indication of the fact that you might not have closed the door properly.
Reason: For this, you need to open the door again and close it back. This indicates that some clothes are blocking the washing machine’s door.
4. dLER
Cause: This error code indicates that the door to the machine does not unlock automatically. The automatic door unlock should occur after the completion of the wash cycle.
Reason: Do not attempt to force open the washing machine door when this occurs. Instead, try the following steps:
- Completely switch off the appliance and offer it two minutes of undisturbed time.
- Now, switch the machine back ON
- By this time, the door to the machine should open up automatically.
- If this Error code keeps recurring, you will need to call the IFB serviceman.
- Till then, it is advised to plug-OUT the appliance and let it stay that way.
5. tAP
Cause: This indicates that the machine is not able to acquire the optimum quantity of water supply.
Reason: There are a couple of reasons, such:
- The tap is turned-OFF, so simply turn it ON.
- Low water supply pressure leads to inadequate water filling capacity. In this case, you need to wait for the water pressure to resume its zest, and then the machine might start back ON.
- There are chances that the inlet filter to your machine is blocked. For this, you will need to unplug the inlet filter and clean it up.
- In case the inlet hose is bent or damaged, the water supply can be damaged in such a case. For this, remove the bend or replace the inlet hose altogether.
6. tACO or trC
Reason: This error code once again refers to the issue with the washing machine door. This usually occurs when the cloth is stuck in between the door.
Solution: For this, you will need to:
- Switch OFF the main supply and wait for approximately two minutes.
- Switch back ON and run the drain program.
- Once all the water has drained out, the door should be able to shut back on itself.
- Arrange the clothes once again within the tub and restart the program.
- In case the same error keeps appearing, you will need a professional help.
7. dPEr
Cause: This implies the drain error where a clogged drain is a reason.
Solution: for this, you will need to :
- Select the Start/Pause button and restart the Drain Program.
- A blocked filter is the reason, and you will need to switch OFF the machine. You can also use the drain pump to empty the water. Now, clean the filter properly.
- A clogged or worn-out exhaust hose is the reason for which you can clean the hose or replace it altogether.
8. HEAt
Cause: This indicates that the water temperature is more than 60 degrees at the beginning of the program.
Solution: For this, you will need to follow a few steps:
- Allow the temperature of the water to reduce below 60 degrees. Now, start the New/Drain program all over again.
- Now, switch the washing machine OFF again and wait a few seconds before you restart.
- In case the error code reoccurs, you will need to get the IFB service person.
9. OFEr or Pr5
Cause: This error does not have any explanation
Solution: try these steps before you finally have to call for professional help:
- Switch the machine OFF.
- Restart the machine and check back for the error.
- In case the error persists, get professional help.
IFB Washing Machine Error Codes: The Conclusion
So, there you have it, people. These are some of the prominent error codes that occur in the IFB washing machine. It is always handy to understand the codes and what they stand for before you call upon the professional service person.