Common Mixer Grinder Problems and Its Solution in 2021

Mixer Grinder Problems are a common concern in most homes. While it can get quite draining to run to a service centre time and again, a few quick fixes can prevent huge issues. But how do you recognize a problem with your machine and what to do if it arises? Well, here are a few commonly occurring concerns you might encounter and solutions to deal with it yourself: 

Mixer Grinder Problems

1. When it Leaks 

This is perhaps one of the most prominent of problems with mixer grinders at our home. Usually, the issue of leakage occurs when the machine gets old or is used more than it should be. Other main reasons for the leakage can be the loosening of blades, a cracked jar, or the rubber gasket being worn out. However, one must bear in mind that some of the top brands also encounter the problem of leakage.

What You Must Do: 

Well, get hold of your screwdriver and get to work, as this is one of the most common mixer grinder problems issues. Now you need to tighten up the loose blades the right way. And voila, you will be surprised by the outcome. Another quick fix is to get the gunmetal changed. This is the part that is fixed to the mixer grinder unit. Usually, the gunmetal of the machine tends to wear off after an average of 3 years of excessive use. As in the case of a cracked- jar, you need to replace it. 

Also Read: Best Mixer Grinders in India

2. Not the Usual Grind

At times one notices that the ingredients are not well-ground. What usually required a single round of grinding takes longer than usual. Also, you need to take note if the same occurs in case of all ingredients to conclude. 

What you Need to Do: 

Well, before you decide to change the blades altogether, you can do something simple at home itself. All you need is some rock salt. Pour about a spoonful into the jar and give it a nice whirl. Repeat a few times for best results, and presto! Your blades are as good as new.

Also Read: Best Chimney In India

3. Trip, Again

You can resolve mixer grinder problems within the confines of your home; repeated tripping is one of them. This usually occurs when you have been using the mixer grinder for an extended period at a single go. Also, overloading and heated ingredients are yet other reasons for the same. So, what do you do when your machine stops abruptly time and again?

What you need to do: 

Well, simply take a look at the underside of your machine( the main motor body). You will find a distinct-looking red-coloured button, tiny in size. All you need to do is press this button to reset your machine. This will offer a ‘kick-start’ to your mixer grinder, and you will be able to operate the machine all over again.

Also Read: Best Wet Grinders In India 2021

4. A Broken Coupler

The coupler is the part that attaches the jar to the main machine body. Usually, after repeated use over time, the coupler tends to wear out. In extreme cases, it might also break altogether. This usually occurs when you blend frozen goods repeatedly in the jar. 

What you need to do: 

Well, let’s set this straight. We need to get professional help to do so. So, let’s not get ahead of ourselves, as dealing with the coupler can get tricky. Now, all you need to do is get hold of a nice professional and have them deal with it.

Also Read: Best Electric Kettles in India

5. Buttons, Stuck

Now, this is something we have had to deal with more often than we remember. You will be surprised by the reasons for this. Buttons tend to get stuck due to the constant spillage of liquids and foods from the jar and onto the buttons. The spillage tends to ‘solidify’ in between the gaps of the buttons and ‘choke’ in the process. This causes the buttons to cease working with time.

What you need to do:

All you need to do in this case is to thoroughly give your jar a nice clean-up. Unplug the device and check if the ‘face’ of your buttons is removable. Nevertheless, an old toothbrush can be used efficiently for this job. Simply take some liquid detergent and gently scrub away the grime. Pat dry a couple of times, and you will be surprised with the results.

Also Read: Best Air Fryer In India

6. Stuck Rotations

Are your blades not rotating well enough or as required? We are usually faced with the problem of finding the motor running but the blades not cooperating enough. This usually occurs when the food materials clog at the junction of the blades and their fixture with the base of the jar.

What you need to do: 

Well, you can do this yourself if you have a good hand with the screwdrivers. All you need to do is remove the blades carefully can cleaning the clog away. Now re-assemble the blades back in order. If you are not too sure, get professional help to do the same, and you are good to go.

Also Read: Best Sandwich Maker in India

7. Jammed Jars

Sometimes, you are left with your jar jammed onto the motor body. The reasons could be plenty. Most commonly, this is due to the food getting leaked from the blades into the motor body. Over time, the motor tends to corrode or rust or both, leading to the issue of the jar getting jammed.

What you need to do:

Well, the solution is relatively simple. All you need to do is turn the entire ‘stuck-up’ setup upside down. Now, pour in an ample amount of (any)oil on the sides of the stuck jar and the motor junction or coupler. Allow sitting for some time, an average of an hour or so, for the oil to do its trick. After the waiting period, try twisting-open the jar. You will probably be able to do so with some help. Once you have ‘freed-open’ the stuck jar, be sure to run it as you would normally do.

Also Read: Best Refrigerators in India


Most mixer grinder problems are very much fixable. It is only a matter of knowing-how that you need to take care of. Once you have a few solutions, tips, and tricks up your sleeves you can very much get your grinder to do its job normally.

Related Post:

Leave a Comment