How to Clean a Gas Stove Burner?

How to clean a Gas Stove Burner? Gas stoves are much quicker as compared to electric cooktops, except when they lose effectiveness. This usually occurs when a burner gets clogged. Hence, a clogged gas burner will give off a weak flame or, in some cases, no flame at all if the burner has been badly soiled. So, how to clean gas burners and get back to cooking in an instant? Well, here are some smart tips on the same: 

How to Clean a Gas Stove Burner?

Foremost, it is necessary to make sure you have all the required supplies at your disposal. Here is how you can go about your cleaning the burner task:

1. The Burner Heads

Utilizing the right tools always makes tasks easier. It is recommended that you use the following for easier and more complete burner head cleaning: 

  • Special brush for cleaning burner head slots.
  • Ignition port cleaning tool.
  • Wire cleaning brush to clean the entire burner head.

It is also advised to follow the instructions in the burner cleaning kit to completely clean the burner heads on your gas range.

2. The Burner Grates and Burner Caps

How to keep a gas stove clean? It is recommended to use a gas grate cleaner to safely clean burner grates and burner caps on most gas ranges.

For this, you can check the owner’s manual provided with your range to make sure that using this type of grate cleaner is perfect for your model gas stove.

3. Cooktop Surface

To clean the gas cooktop surface, you will generally require a cooktop cleaning crème to remove stains and polish the stovetop. Hence, to clean and polish a stainless steel cooktop surface, you will require a stainless steel cleaner from a reputed brand.

Precautions and Safety Measures

How to clean the burner on the gas stove? Well, it is important to follow the below tips to get the best results when doing so:

  • Soak the burners to make for easier cleanup.
  • Remove the burner parts before you clean the stove’s surface.
  • Allow the tough grease grime to soak in the cleaning solution before you scrub them.
  • In case you use cast iron on a glass stovetop, you can protect the glass stovetop from any black marks by cleaning off the built-up carbonization on the bottom of the pan before utilizing it on your stove.
  • Be sure to avoid the use of a knife or sharp object to scrape the caked-on food. This can damage the stovetop.
  • Be sure not to clean your gas stove when it is on or hot.

How to Clean Gas Stove Burner?

Here are the steps to clean the gas stove burner properly:

Step 1. To Remove the Burner Cap and Burner Base

Before you remove the burner cap or burner base, ensure the gas stove top is cool enough to the touch and the appliance is unplugged. Now, simply remove the grates and lift the cap off of the burner.
In the case of some burner bases, you might need a screwdriver to remove the screws. If required, you can remove the screws, then gently lift the base and disconnect the wires.
In case your model comprises a standing pilot light, make sure to turn off the gas valve before removing any parts.

Step 2. Cleaning the Burner Cap and Base

It is advised to use a non-abrasive, plastic scrubbing pad and a gently abrasive cleaner when cleaning the burner caps and base. Here are the tips to help you clean these parts of your gas stove top:

  • The cooktop is the easiest to clean as soon as the top, grates, and caps are cool following cooking.
  • Never clean burner caps in the oven during a Self-Cleaning cycle.
  • Never wash burner caps in the dishwasher.

Step 3. Cleaning the gas Tube Opening Under the Base

There are times when you might need to remove your cooktop surface to access the gas tubes. These tubes are generally located beneath the burner base and function as the connection to the gas valve.
Once located, unscrew the tube from the base and clean any debris within the tube opening with a straight pin, needle, or small gauge wire. Be careful not to damage the tube in the process. Once done, reattach the tube to the base and replace the cooktop surface.

Step 4. Gently Clean the Igniter with a Damp Cloth

The igniter is a small port generally located beneath the burner base. Now, slowly remove any debris from the igniter using a damp cloth.

Step 5. Clean Clogged Burner Ports

Using a straight pin, needle, or small-gauge wire, you can clean the clogged burner ports. To be able to clean the ports correctly, avoid doing the following:

  • Never attempt to clean the burner ports in the dishwasher.
  • Never enlarge or distort the port.

Step 6. Reinstalling the Burner Base and Cap

If your burner base has been attached with screws, tightly reattach the base. Once the burner base is secure, place the cap on top of the base. Caps must be seated upon the base to be able for the burner to ignite properly.

  • Ensure the alignment pins, if present, are properly adjusted using the burner cap and the correct burner cap is on the correct burner base. 
  • Take note that the burner cap fits flush with the burner base and has very little side-to-side movement.

Step 7. Turn on the Gas Stove Burners

After securely attaching and aligning the base and cap, turn the stove knob on to activate the igniter. If the burner does not light, check the cap alignment and if the correct burner cap is on the correct burner base.

Maintenance Tips

How to clean gas stove burners easily? Well, you know now, if your stovetop caps are still looking dirty or dingy, try these tips to help clean them better: 

NOTE: Before cleaning, ensure all the controls are off and the cooktop is cool. Soap, water, and a soft cloth or sponge are suggested first unless otherwise noted. 

  • Using a non-abrasive plastic scrubbing pad and a mildly abrasive cleaner is advised. Clean once the cooktop, grates, and caps have cooled down. 
  • Never clean burner caps in the oven during a Self-Cleaning cycle.
  • Never wash the burner caps in the dishwasher unless mentioned in your Use and Care Guide.
  • Food spills that contain acids, such as vinegar and tomato, should be cleaned as soon as the cooktop, grates, and caps are cool. These spills can affect the finish.
  • To avoid chipping, do not bang caps against each other or hard surfaces like in cast iron cookware.

How to Clean a Gas Stove Burner? : Conclusion

So, there you have it, people. These are the tips on how to clean gas stoves and burners easily.
Apart from cleaning burners using DIY, you can also use recommended branded cleaning Products for removing rust from metals. This can also be used for cleaning your cars and bikes, lubricating door hinges, and much more.

It is also advised to schedule your appliance maintenance appointment yearly to make sure that your range stays in its best working order throughout. This will offer you with years of reliable service. Finally, it is advised not to neglect your other appliances. This will offer you reliable operation for years to come when you do not have to worry about shelling big bucks in maintenance.

Liked our content? Share it with Your Friends.